Recover From Expanding VHD or VDHX Files On VMs With Checkpoints

So you’ve expanded the virtual disk (VHD/VHDX) of a virtual machine that has checkpoints (or snapshots as they used to be called) on it. Did you forget about them?  Did you really leave them lingering around for that long?  Bad practice and not supported (we don’t have production snapshots yet, that’s for Windows Server 2016). Anyway your virtual machine won’t boot. Depending on the importance of that VM you might be chewed out big time or ridiculed. But what if you don’t have a restore that works? Suddenly it’s might have become a resume generating event.

All does not have to be lost. Their might be hope if you didn’t panic and made even more bad decisions. Please, if you’re unsure what to do, call an expert, a real one, or at least some one who knows real experts. It also helps if you have spare disk space, the fast sort if possible and a Hyper-V node where you can work without risk. We’ll walk you through the scenarios for both a VHDX and a VHD.

How did you get into this pickle?

If you go to the Edit Virtual Hard Disk Wizard via the VM settings it won’t allow for that if the VM has checkpoints, whether the VM is online or not.

image

VHDs cannot be expanded on line. If the VM had checkpoints it must have been shut down when you expanded the VHD. If you went to the Edit Disk tool in Hyper-V Manager directly to open up the disk you don’t get a warning. It’s treated as a virtual disk that’s not in use. Same deal if you do it in PowerShell

Resize-VHD -Path “C:\ClusterStorage\Volume2\DidierTest06\Virtual Hard Disks\RuinFixedVHD.vhd” -SizeBytes 15GB

That just works.

VHDXs can be expanded on online if they’re attached to a vSCSI controller. But if the VM has checkpoints it will not allow for expanding.

image

So yes, you deliberately shut it down to be able to do it with the the Edit Disk tool in Hyper-V Manager. I know, the warning message was not specific enough but consider this. The Edit disk tool when launched directly has no idea of what the disk you’re opening is used for, only if it’s online / locked.

Anyway the result is the same for the VM whether it was a VHD or a VHDX. An error when you start it up.

[Window Title]
Hyper-V Manager

[Main Instruction]
An error occurred while attempting to start the selected virtual machine(s).

[Content]
‘DidierTest06’ failed to start.

Synthetic SCSI Controller (Instance ID 92ABA591-75A7-47B3-A078-050E757B769A): Failed to Power on with Error ‘The chain of virtual hard disks is corrupted. There is a mismatch in the virtual sizes of the parent virtual hard disk and differencing disk.’.

Virtual disk ‘C:\ClusterStorage\Volume2\DidierTest06\Virtual Hard Disks\RuinFixedVHD_8DFF476F-7A41-4E4D-B41F-C639478E3537.avhd’ failed to open because a problem occurred when attempting to open a virtual disk in the differencing chain, ‘C:\ClusterStorage\Volume2\DidierTest06\Virtual Hard Disks\RuinFixedVHD.vhd’: ‘The size of the virtual hard disk is not valid.’.

image

You might want to delete the checkpoint but the merge will only succeed for the virtual disk that have not been expanded.  You actually don’t need to do this now, it’s better if you don’t, it saves you some stress and extra work. You could remove the expanded virtual disks from the VM. It will boot but in many cased the missing data on those disks are very bad news. But al least you’ve proven the root cause of your problems.

If you inspect the AVVHD/AVHDX file you’ll get an error that states

The differencing virtual disk chain is broken. Please reconnect the child to the correct parent virtual hard disk.

image

However attempting to do so will fail in this case.

Failed to set new parent for the virtual disk.

The Hyper-V Virtual Machine Management service encountered an unexpected error: The chain of virtual hard disks is corrupted. There is a mismatch in the virtual sizes of the parent virtual hard disk and differencing disk. (0xC03A0017).

image

Is there a fix?

Let’s say you don’t have a backup (shame on you). So now what? Make copies of the VHDX/AVHDX or VHD/AVHD and save guard those. You can also work on copies or on the original files.I’ll just the originals as this blog post is already way too long. If you. Note that some extra disk space and speed come in very handy now. You might even copy them of to a lab server. Takes more time but at least you’re not working on a production host than.

Working on the original virtual disk files (VHD/AVHD and / or VHDX/AVHDX)

If you know the original size of the VHDX before you expanded it you can shrink it to exactly that. If you don’t there’s PowerShell to the rescue if you want to find out the minimum size.

image

But even better you can shrink it to it’s minimum size, it’s a parameter!

Resize-VHD -Path “C:\ClusterStorage\Volume2\DidierTest06\Virtual Hard Disks\RuinFixedVHD.vhd” -ToMinimumSize

Now you not home yet. If you restart the VM right now it will fail … with the following error:

‘DidierTest06’ failed to start. (Virtual machine ID 7A54E4DB-7CCB-42A6-8917-50A05354634F)

‘DidierTest06’ Synthetic SCSI Controller (Instance ID 92ABA591-75A7-47B3-A078-050E757B769A): Failed to Power on with Error ‘The chain of virtual hard disks is corrupted. There is a mismatch in the identifiers of the parent virtual hard disk and differencing disk.’ (0xC03A000E). (Virtual machine ID 7A54E4DB-7CCB-42A6-8917-50A05354634F)

image

What you need to do is reconnect the AVHDX to it’s parent and choose to ignore the ID mismatch. You can do this via Edit Disk in Hyper-V Manager of in PowerShell. For more information on manually merging & repairing checkpoints see my blogs on this subject here. In this post I’ll just show the screenshots as walk through.

image

image

image

image

image

Once that’s done you’re VHDX is good to go.

For a VHD you can’t shrink that with the inbox tools. There is however a free command line tool that can do that names VHDTool.exe. The original is hard to find on the web so here is the installer if you need it. You only need the executable, which is portable actually, don’t install this on a production server. It has a repair switch to deal with just this occurrence!

Here’s an example of my lab …

D:\SysAdmin>VhdTool.exe /repair “C:\ClusterStorage\Volume2\DidierTest06\Virtual Hard Disks\RuinFixedVHD.vhd” “C:\ClusterStorage\Volume2\DidierTest06\Virtual Hard Disks\RuinFixedVHD_8DFF476F-7A41-4E4D-B41F-C639478E3537.avhd”

image

That’s it for the VHD …

You’re back in business!  All that’s left to do is get rid of the checkpoints. So you delete them. If you wanted to apply them an get rid of the delta, you could have just removed the disks, re-added the VHD/VHDX and be done with it actually. But in most of these scenarios you want to keep the delta as you most probably didn’t even realize you still had checkpoints around. Zero data loss Winking smile.

Conclusion

Save your self the stress, hassle and possibly expense of hiring an expert.  How? Please do not expand a VHD or VHDX of a virtual machine that has checkpoints. It will cause boot issues with the expanded virtual disk or disks! You will be in a stressful, painful pickle where you might not get out of if you make the wrong decisions and choices!

As a closing note, you must have have backups and restores that you have tested. Do not rely on your smarts and creativity or that others, let alone luck. Luck runs out. Otions run out. Even for the best and luckiest of us. VEEAM has save my proverbial behind a few times already.

The Mysterious Case of Infrequent Network Connectivity Issues on 2 Hyper-V VMs Out of 40 Guests

In The Mysterious Case of Infrequent Network Connectivity Issues on 2 Hyper-V VMs Out of 40 Guests I share a trouble shooting experience with you. I was asked if I could possibly take a look at a weird, but very infrequent network issue with 2 VMs (W2K12R2) on a cluster (W2K12R2) running over 40 guests? Sure! These 2 virtual machines worked well 98% of the time. About 2% of the time they just fell of the network, sometimes both vNICs, sometimes both VMs. Asking what they meant, they said unreachable. But we can’t find anything wrong as all other VMs run fine with the same configuration on the same hosts. They told me there was nothing in the event logs of either the host or the guests to explain any of this. A reboot or 2 or even a live migration sometimes fix the issue. Normally the monthly patch cycle prevent to many problems with connectivity. Pretty weird! Usually bad firmware, drivers or bad offload feature support can cause issues, but that would not target just 2 out of 40 VMs that have the same settings.

It was only these 2 VMs, not matter what host the were running on in the cluster. As the the vNICs shared the same 2 vSwitches (teamed) with all other VMS that never had issues I was pretty sure the configuration of the switches, NIC, teams and vSwitch were OK. This was verified for due diligence and it  checked out on all hosts as expected. All firmware, drivers and offloads were done correctly.

I also checking the VLANs settings of the vNIC themselves for those two VMs and compared them a couple of VMs that had no issues what so ever and found them to be identical.

At first everything seemed fine and I was stumped. The event logs both in the VMs as on the hosts were squeaky clean. After that exercise I started running some PowerShell command lets to take a look at the configuration of the VMs on the hosts. You see the GUI does not expose all possible configurations and I wanted to look every configuration option. That’s when I found the following

image

The vNIC for the 2 offending VMs were in Access mode while the VlanList had a single value 0 (basically meaning untagged, it’s a reserved VLAN for priority tagging and the use is not 100% standard across switch vendors). This just didn’t compute. In the GUI we did not see this, there things looked normal.

image

You cannot even set this in the GUI, it won’t allow you.

image

image

But when run in a PowerShell command it allows you to make this configuration. So maybe that’s what’s happened.

Set-VMNetworkAdaptervlan -VMName DNS01 -Access -VlanId 0

No one knew, nor can I tell you. But I tested to verify this does run and makes that configuration without any issue, weird. Anyway, I resolved the issue by running the following command.

Set-VMNetworkAdaptervlan -VMName DNS01 –Untagged

image

The rare connectivity issue disappeared and all was well in 100% of the cases. That how The Mysterious Case of Infrequent Network Connectivity Issues on 2 Hyper-V VMs Out of 40 Guests came to a happy end.

Trouble Shooting Intermittent Virtual Machine Network Connectivity

I was asked to take a look at an issue with virtual machines losing network connectivity. The problems were described as follows:

Sometimes some VMs had connectivity, some times they didn’t. It was not tied to specific virtual machines. Sometimes the problem was not there, than it showed up again. It was, not an issue of a wrong subnet mask or gateway.

They suspected firmware or driver issues. Maybe it was a Windows NIC teaming bug or problems with DVMQ or NIC offload settings. There’s a lot of potential reasons, just Google Intermittent VM connectivity Issues Hyper-V and you’ll get a truckload of options.

So a round of wishful firmware, driver upgrading started. Followed by a round of wishful disabling network features. That’s one way to do it. But why not sit back an look at the issue.

Based on what they said I looked at the environment and asked it was tied to specific host as only VMs on one of the hosts had the issue.  Could it be be after a live migration or a VM restart. They didn’t really know but it could. So we started looking at the hosts. All teams for the vSwitch were correctly configured on all host. No tagged VLAN on the member NIC. No extra team interfaces that would violate the rule that there can be only one if the team is used by a Hyper-V switch. They used the switch independent teaming mode with the load balancing mode set to Dynamic, all member active. Perfect.

I asked it they used tagged VLAN on the VMs some times. They said yes. Which gave me a clue they had trunking or general mode configured on the ports. So I looked at the switches to see what the port configuration was like?  Guess what. All ports on both switches were correctly configured bar the ports of the vSwitch team members on one Hyper-V host. The one with problematic VMs. The two ports were in general mode but the port on the top switch had PVID* 100 and the one on the bottom switch had PVID 200. That was the issue. If the VM “landed” on the team member with PVID 200 it has no network connectivity.

HyperV-vSwitchTeam-WronNativeVLAN

 

* PVID (switchport general pvid 200) is the default VLAN of the port, in CISCO speak that would translate into “”native VLAN as in switchport trunk native vlan 200

Yes NIC firmware and drivers have issues. There are bugs or problems with advanced features once in a while. But you really do need to check that the configuration is correct and the design or setup makes sense. Do yourself a favor by not assuming anything. Trust but verify.

DELL Microsoft Storage Spaces Offerings

Dell was the 1st OEM to actively support and deliver Microsoft Storage Spaces solutions to its customers.

image

They recognized the changing landscape of storage and saw that this was one of the option customers are interested in. When DELL adds their logistical prowess and support infrastructure into the equation it helps deliver Storage Spaces to more customers. It removes barriers.

In June 2015 DELL launched their newest offering based on generation 13 hardware.

image

Recently DELL has published it’s docs and manuals for Storage Spaces with the MD1420 JBOD Storage Spaces with the MD1420 JBOD

You can find some more information on DELL storage spaces here and here.

I’m looking forward to what they’ll offer in 2016 in regards to Storage Spaces Direct (S2D) and networking (10/25/40/50/100Gbps). I’m expecting that to be a results of some years experience combined with the most recent networking stack and storage components. 12gbps SAS controller, NVMe options in Storage Spaces Direct. Dell has the economies of scale & knowledge to be one of the best an major players in this area. Let’s hope they leverage this to all our advantage. They could (and should) be the first to market with the most recent & most modern hardware to make these solutions shine when Windows Server 2016 RTM somewhere next year.