I’m In Austin Texas For Dell World 2013

This is the night time sky line of where I’m at right now. Austin, Texas, USA. That famous “Lone Star State” that until now I only knew from the movies & the media. Austin is an impressive city in an impressive state and, as most US experiences I’ve had, isn’t comparable with anything in my home country Belgium. That works both ways naturally and I’m lucky I get to travel a bit and see a small part of the world.image

Dell World 2013

So why am I here?  Well I’m here to attend DELL World 2013, but you got that already Smile

image

That’s nice Didier but why DELL World? Well, several reasons. For one, I wanted to come and talk to as many product owners & managers, architects & strategists as I can. We’re seeing a lot of interest in new capabilities that Windows Server 2012 (R2) brought to the Microsoft ecosystem. I want to provide all the feedback I can on what I as a customer, a Microsoft MVP and technologist expect from DELL to help us make the most of those. I’m convinced DELL has everything we need but can use some guidance on what to add or enhance. It would be great to get our priorities and those of DELL aligned. Form them I expect to hear their plans, ideas, opinions and see how those match up. Dell has a cost/value leadership position when it comes to servers right now. They have a great line up of economy switches that pack a punch (PowerConnect) & some state of the art network gear with Force10. it would be nice to align these with guidance & capabilities to leverage SMB Direct and NVGRE network virtualization. Dell still has the chance to fill some gaps way better than others have. A decent Hyper-V network virtualization gateway that doesn’t cost your two first born children and can handle dozens to hundreds of virtual networks comes to mind. That and real life guidance on several SMB Direct with DCB configuration guidance. Storage wise, the MD series, Equalogic & Compellent arrays offer great value for money. But we need to address the needs & interest that SMB 3.0, Storage Spaces, RDMA has awoken and how Dell is planning to address those. I also think that OEMs need to pick up pace & change some of their priorities when it comes to providing answers to what their customers in the MSFT ecosystem ask for & need, doing that can put them in a very good position versus their competitors. But I have no illusions about my place in & impact on the universe.

Secondly, I was invited to come. As it turns out DELL has the same keen interest in talking to people who are in the trenches using their equipment to build solutions that address real life needs in a economical feasible way.  No, this is not “just” marketing. A smart vendor today communicates in many ways with existing & potential customers. Social media is a big part of that but also off line at conferences, events and both contributor and sponsor.  Feedback on how that works & is received is valuable as well for both parties. They learn what works &n doesn’t and we get the content we need. Now sure you’ll have the corporate social media types that are bound by legal & marketing constrictions but the real value lies in engaging with your customers & partners about their real technological challenges & needs.

Third is the fact that all these trends & capabilities in both the Microsoft ecosystem and in hardware world are not happening in isolation. They are happening in a world dominated by cloud computing in all it’s forms. This impact everything from the clients, servers, servers to the data centers as well as the people involved. It’s a world in which we need to balance the existing and future needs with a mixture of approaches & where no one size fits all even if the solutions come via commodity products & services. It’s a world where the hardware  & software giants are entering each others turf. That’s bound to cause some sparks Smile. Datacenter abstraction layer, Software Defined “anything” (storage, networking, …), converged infrastructure. Will they collaborate or fight?

So put these three together and here I am. My agenda is full of meetings, think tanks, panels, briefings and some down time to chat to colleagues & DELL employees alike.

Why & How?

Some time ago I was asked why I do this and why I’m even capable to do this. It takes time, money and effort.  Am I some kind of hot shot manager or visionary guru? No, not at all. Believe there’s nothing “hot” about working on a business down issue at zero dark thirty. I’m a technologist. I’m where the buck stops. I need things to work. So I deal in realities not fantasies. I don’t sell methods, processes or services people, I sell results, that’s what pays my bills long term. But I do dream and I try to turn those into realities. That’s different from just fantasy world where reality is an unwelcome guest. I’m no visionary, I’m no guru. I’m a hard working IT Pro (hence the blog title and twitter handle) who realizes all to well he’s standing on the shoulders of not just giants but of all those people who create the ecosystem in which I work. But there’s more. Being a mere technologist only gets you that far. I also give architectural & strategic advice as that’s also needed to make the correct decisions. Solutions don’t exist in isolation and need to be made in relation to trends, strategies and needs. That takes insight & vision. Those don’t come to you by only working in the data center, your desktop or in eternal meetings with the same people in the same place. My peers, employers and clients actively support this for the benefit of our business, customers, networks & communities. That’s the what, why and who that are giving me the opportunities to learn & grow both personally & professionally. People like Arlindo Alves and may others at MSFT, my fellow MVPs (Aidan Finn, Hans Vredevoort, Carsten Rachfahl, …), Florian Klaffenbach & Peter Tsai. As a person you have to grab those opportunities. If you want to be heard you need to communicate. People listen and if the discussions and subjects are interesting it becomes a two way conversation and a great learning experience. As with all networking and community endeavors you need to put in the effort to reap the rewards in the form of information, insights and knowledge you can leverage for both your own needs as well as for those in your network. That means speaking your mind. Being honest and open, even if at times you’re wrong. That’s learning. That, to me, is what being in the DELL TechCenter Rock StarDELL TechCenter Rock Star program is all about.

Learning, growing, sharing. That and a sustained effort in your own development slowly but surely makes you an “expert”. An expert that realizes all to well how much he doesn’t known & cannot possible all learn.  Luckily, to help deal with that fact, you can turn to the community.

Live Migration Can Benefit From Jumbo Frames

Does live migration benefit from Jumbo frames? This question always comes back so I’d just blog it hear again even if I have mentioned it as part of other blog posts. Yes it does! How do I know. Because I’ve tested and used it with Windows Server 2008 R2, 2012 & 2012 R2. Why? because I have a couple of mantra’s:

  • Assumption are the mother of all fuckups
  • Assume makes an ASS out of U and ME
  • Trust but verify

What can I say. I have been doing 10Gbps since for Live Migration with Hyper-V. And let me tell you my experiences with an otherwise completely optimized server (mainly BIOS performance settings): It will help you with up to 20% more bandwidth use.

And thanks to Windows Server 2012 R2 supporting SMB for live migration we can very nicely visualize this with 2*10Gbps NICS, not teamed, used by live migration leveraging SMB Multichannel. On one of the 10Gbps we enable Jumbo Frames on the other one we do not. We than live migrate a large memory VM back and forth. Now you tell me which one is which.

image

Now enable Jumbo frames on both 10Gbps NICs and again we live migrate the large memory VM back and forth. More bandwidth used, faster live migration.

image

I can’t make it any more clear. No jumbo frames will not kill your performance unless you have it messed up end to end. Don’t worry if you have a cheaper switch where you can only enable it switch wide instead op port per port. The switch is a pass through. So unless you set messed up sizes on sender/receiving host that the switch in between can’t handle, it will work even without jumbo frames and without heaven falling down on your head Smile. Configure it correctly, test it, and you’ll see.

E2EVC Rome 2013–Attending & Speaking

I’m attending and speaking at the E2EVC (Experts2Experts Virtualization Conference) in Rome, November 1-3.

I’ll be doing a talk on networking features in Windows Server 2012 R2 & Hyper-V. The good, the bad & the ugly. And no, no SDN talk. It’s about the other stuff.

“Session Topic: Networking Options For Virtualization in Windows Server 2012 R2
Short description: In Windows 2012 R2 there are many networking options available to optimize for both speed & redundancy. Let’s talk about some of them and see where and when they can help. The biggest problem is thinking you need  all of them or wanting all of them. Others are knowledge& complexity. Join us for a chalk & talk discussing all this. Some fellow MVPs will be there and we all have different experiences in different environments.
Presenter: Didier Van Hoye, Microsoft MVP”

It will be an interactive chalk & talk based on testing & experiences with these features & demos if the internet holds up.

image

It’s a suburb non-commercial, virtualization community Event. It brings the best real life  virtualization experts together to exchange knowledge and to establish new connections. Lots of presentations, Master Classes and discussions going on both the attendees, vendors product teams & independent experts.

Now this is a conference where marketing & marchitecture is shot down fast & hard. But always in a friendly way. These people are all working in the sector and they have to keep it real. They have a business & a livelihood that depends on them delivering results, not fairy tales & management pleasing BS. These people tell you what you need to know, not what you want to hear.

Look at the turnout for this event, this twitter list reads as the “Who’s Who In Virtualization”: @pcrampton, @joe_elway, @shawnbass, @ThomasMaurer, @Andrea_Mauro, @hansdeleenheer, @drtritsch, @WorkingHardInIT, @HelgeKlein, @JimMoyle, @neilspellings, @andyjmorgan, @KBaggerman, @CarlWebster, @bsonposh, @gilwood_cs, @E2EVC, @KristianNese, @_POPPELGAARD, @barryschiffer, @RemkoWeijnen, @IngmarVerheij, @WilcovanBragt, @david_obrien, @Microspecialist, @virtualfat, @LFoverskov, @virtuEs_IT, @stibakke, @granttiller, @Easi123, @ChrisJMarks, @arbeijer, @znackattack, @ShaunRitchie_UK, @Rob_Aarts, @StefanKoell, @EHouben, @crachfahl, @JeroenTielen, @plompr, @Gkunst, @drmiru, @espenbe, @marcdrinkwater, @DocsMortar, @AlBayliss, @wedelit, @pzykomAtle, @LoDani, @fborozan, @JeffWouters, @mrpickford, @smspasscode, @schose, @rvanderkruk, @TimmBrochhaus, @HansMinnee, @JZanten, @Sargola, @JaspervanWesten, @airdeca_nl, @danielBuonocore, @PeppelT, @TondeVreede, @pcortis, @ConorScolard, @CarstenDreyer, @arnaud_pain, @RoyTextor, @saschazimmer, @abstrask, @loopern, @PulseITch, @joarleithe, clarecoops9, @rfolmer, @wimoortgiesen  …

Here’s the conference agenda: http://www.e2evc.com/home/Agenda.aspx

See you there Smile and I’m looking forward to seeing my community buddies!

Virtual Receive Side Scaling (vRSS) In Windows Server 2012 R2 Hyper-V

What is it?

One of the cool new features that takes scalability in Windows Server 2012 R2 Hyper-V to a new level is virtual Receive Side Scaling (vRSS). While since In Windows Server 2012, Receive Side Scaling (RSS) over SR-IOV is supported it’s best suited for some specialized environments that require the best possible speeds at the lowest possible latencies. While SR-IOV is great for performance it’s not as flexible as for example you can’t team them so if you need redundancy you’ll need to do guest NIC Teaming.

vRSS is supported on the VM network path (vNIC, vSwitch, pNIC) and allows VMs to scale better under heavier network loads. The lack of RSS support in the guest means that there is only one logical CPU (core 0) that has to deal with all the network interrupts.  vRSS avoid this bottleneck by spreading network traffic among multiple VM processors. Which is great news for data copy heavy environments.

What do you need?

Nothing special, it works with any NICs that supports VMQ and that’s about all 10Gbps NICs you can buy or posses. So no investment is needed. It’s basically the DVMQ capability on the host NIC that has VMQ capabilities that allows for vRSS to be exposed inside of the VM over the vSwitch. To take advantage of vRSS, VMs must be configured to use multiple cores, and they must support RSS => turn it on in the vNIC configuration in the guest OS and don’t try to use a home PC 1Gbps card Winking smile

image

vRSS is enabled automatically when the VM uses RSS on the VM network path. The other good news is that this works over NIC Teaming. So you don’t have to do in guest NIC Teaming.

What does it look like?

Now without SR-IOV it was a serious challenge to push that 10Gbps vNIC to it’s limit due to all the interrupt handling being dealt with by a single CPU core. Here’s what a VMs processor looks like under a sustained network load without vRSS. Not to shabby, but we want more Smile

image
As you can see the incoming network traffic has the be dealt with by good old vCore 0. While DVMQ allows for multiple processors on the host dealing with the interrupts for the VMs it still means that you have a single core per VM. That one core is possibly a limiting factor (if you can get the network throughput and storage IO, that is). vRSS deals with this limitation. Look at the throughput we got copying  lot of data to the VM below leveraging vRSS. Yeah that’s 8.5Gbps inside of a VM. Sweet Open-mouthed smile. I’m sure I can get to 10Gbps …

image