Using Windows 2008 (R2) Backups to Go Virtual

Part I

The Challenge

This series describes a physical to virtual migration of a Windows Server 2008 SP2 Standard x64 on a Dell Power Edge one unit rack server with SATA disks (PE750). In fact that was the first production Windows 2008 server ever at that company, they really wanted to use the RTW FTP over SSL functionality. For this exercise we had no use of commercial P2V tools and the original server had to be kept running during the virtualization exercise. The aim was to achieve this with the free / built in tools as much as possible. The hands on approach also provides for an excellent learning opportunity. We have reconstructed our experiences for this article and will discuss the subject for both Windows 2008 and Windows 2008 R2.

Physical Machine

Disk Layout

The physical server has no raid controller. For redundancy reasons dynamic disks are used for software mirroring. The original 160 GB SATA disks were going to run out of space "very soon" during its lifespan they claimed, so they were swapped out for bigger ones. This was done one by one, with mirror rebuilding in between, and as such we "leapfrogged" to two 1TB disks. We then made a bigger data partition by concatenating the disks. That combined with some leading free disk space where OEM partition used to be on the original disks resulted in an interesting disk layout. The installation was healthy but the disk layout was not optimal and in fact, the server had way to much disk space. The owners indicated they would need vast amounts of disk space but this proved exaggerated and actual data needs are around 110 GB with some margin for growth. The disk layout is illustrated in below in Figure 1 and shows the disk configuration on the physical machine.

Windows Backup

Backups of this server are made to a file share using a script that automates Windows 2008 Backup (wbadmin.exe). The script does not only backup the server, it also creates backup archives. This is need as Windows 2008 Backup to a UNC path overwrites the last backup. So to keep a couple of weeks/months worth of backups we need to move them out to a save place. The script also collects logs about what’s happening for auditing and mails these to the system administrators indicating success or failure. Since the script also needs to work on Windows Server Core it’s VBScript (it was written late 2007) as .NET support and thus Power Shell is only available in Windows 2008 R2. We will use a backup of the physical machine to restore the server to a virtual machine.

Figure 1: The disk configuration on the physical machine. The bad quality is due to it being taken over a KVM over IP session from the original server!

Goal of the Migration

During the migration we wanted to sanitize the disk layout if possible. The task at hand was to migrate this server to a virtual machine using built in or free tools. Only if we could not find another way we could resort to commercial third party tools but only if we had them available at no extra cost (so a working trial or evaluation version is allowed). We could not use SCVMM 2008 as this server is member of a different domain (in the DMZ). The option of making it a member of our production domain is a no go due to security concerns and installing SCVMM2008 in the DMZ domain was not allowed. The original server also had to be online during the virtualization. We therefore opted to restore the backup of the physical server to a virtual server. During this process our goal was to:

  • resize the disks (no use wasting disk space),
  • separate the system drive from the data drive,
  • convert theWindows dynamic disks to basic disks (no need for dynamic disks and better support with a lot of hard disk tools ),
  • use fixed vhd files for better performance (note: dynamically expanding disks are not that noticeably slower I must say, in low IO situations with little growth. In W2K8R2 the difference is reported to be negligible)

The picture below, Figure 2, illustrates the desired (and achieved) outcome.

Figure 2: The desired disk configuration in a virtual machine.

Preparing a Virtual Machine to Restore the Backup

The entire process described below describes most of the problems you can encounter with restoring Windows 2008 Backups in general. Pay attention to the solutions to these problems and you’ll do just fine. I read a lot of postings on the internet about Windows 2008 backups not working properly but it does. You just need to learn about its limits and abilities. And yes, there are some "quirks" that you need to be aware of. Once you learn this the build in tool will serve you well. I think some of these quirks Microsoft should have documented better and some things are indeed missing functionality (most have been fixed in R2), which is unfortunate but not a show stopper. Remember the definition of engineering: building good working solutions with the means available.

Since we will restore the backup of the physical server to a virtual server, we need to prepare one. We use the Hyper-V to achieve this.

Create the Disks

We start by creating two disks. We need two disks because the original backup was of a server with two physical disks that were members of a software mirror, which also means they were dynamic disks. If you don’t have to disk to restore to you’ll get a cryptic error that the system image restore failed with some error details "Element not found. (0x80070490)". This is the same error you can when the disk layout/boot order is different on the restore machine than the original one. Pay attention to this.

Figure 3: Mind the disk layout and order or you’ll get into trouble.

Windows backup can only restore to disks of the same size or larger (unless you start doing partition restores manually and get handy with BCDEDIT). Since our physical are 1TB and we didn’t have the disk space for such large VHD files we needed to be a bit creative. We came up with the workaround of restoring to dynamic vhd files of 1048 GB (making sure it was indeed a bit larger than the original ones in the backup). The actual size of the data is not higher that 160 GB anyway so the dynamic VHD will not grow beyond that. The restore will see that the disk are large enough and function as planned. We’ll deal with the resizing of the disks, making them basic disks in windows and converting them to fixed vhd after the Servers has been restored to a virtual machine.

Figure 4: The details of the dynamically expanding vhd’s we create to restore the backup to.

Do make sure that you restart the virtual machine once with the new hard disks attach. This is to make sure the disk preparation is 100% finished. IF not a restore might fail with following error: "The system image restore failed." The error details state: "The computer needs to be restarted to finish preparing a hard disk for restore. To continue, restart your computer and run the restore again. (0x80042403)."

Figure 5: Error trying to restore a backup to new not yet prepared disk.

Allocate CPU & Memory

We configure the VM with CPU like the original one. As the original operating system is Windows 2008 x86 we won’t have many issues with virtualization due to the wrong HAL and such … things on that level have definitely become a lot easier and better than they used to be. We allocate enough memory to get the job done on my host.

Networking

We also configure the machine with a temporary legacy NIC. We use a legacy NIC for the restore when we restore a Windows 2008 server because the synthetic NIC aren’t included in the DVD image (you could build one using the WAIK) and we need a functional NIC to get to our backup on the file share. The Windows 2008 R2 image does contain the drivers you need for a synthetic NIC. To make live easy we have a DHCP server had out IP addresses. That saved us the trouble of configuring the TCP/IP settings manually during the restore process. No other NIC’s where configured so the restored VM wouldn’t conflict with the physical one still running in production.

Figure 6: The settings of the prepared VM to which we are going to restore the Windows Backup of the physical machine.

Recapture of Windows Backup in 2008 (R2) Restore Quirks

Mirrored Disks & Disk Layout

When restoring from a software mirrored dynamic disks make sure you have two disks to restore to or you’ll get an error indicating very helpfully that an "element was not found". Pay close attention to the disk layout/ boot order as well, the restore doesn’t allow for variation from the original layout.

Disk Size

Make sure the disks are as large as or larger than the original ones. Another possible other work around is using wbadmin and restoring each partition individually to where you want it and manually editing the disk with BCDEDIT to get it to boot properly would also work it’s a bit tedious and we would still need to shrink the data partition.

Wrong path to backups

Make sure you specify the correct path to restore from \MyServerMyBackupShare where it will than find the WindowsImageBackup folder by itself with the backup(s) of one or more servers in there. You can even copy backups from other locations to that folder; they will be found and listed.

Hyper-V Legacy NIC required for UNC path restores

Make sure your virtual machine in Hyper-V has a legacy nic when restoring a Windows 2008 server or the restore from the unc path will fail because network connectivity can’t be established otherwise and you’ll receive this error: "An internal error occurred. The following information might help you resolve the error: The network path was not found. (0x80070035)". See Figure 7.

Figure 7: Use a NIC that the Windows DVD has drivers for.

This is due to the fact that there are no synthetic NIC drivers in Windows 2008 DVD image. They are available in the Windows 2008 R2 DVDV image however.

I hope you realize you’ll need the correct share/NTFS permissions for the account you’ll use to access the backup share!

So we’re all set. In the next part we’ll discuss the actual restore.

Stories of Windows Backup, P2V, V2V & V2P

In the period 2008-2009 I did quite a lot of work on windows backup for Windows 2008 (R2) involving both physical and virtual (VMware Server & Hyper-V) servers. Apart from backing up certain servers we used it as a free Physical to Virtual (P2V) solution. We also did some Virtual to Virtual (V2V) migrations from VMware Server guests to Hyper-V. All this was in smaller business units or in SME’s where using the functionality inside Windows and free tools was important. Also some servers need nothing beyond what windows backup can deliver.

Part I: https://blog.workinghardinit.work/2010/01/27/using-windows-2008-r2-backups-to-go-virtual-2/
Part II: https://blog.workinghardinit.work/2010/02/01/using-windows-2008-r2-backups-to-go-virtual-ii/
Part III: https://blog.workinghardinit.work/2010/02/02/using-windows-2008-r2-backups-to-go-virtual-part-iii/

The benefit of such work is that one gets to learn a lot about the quirks and hiccups of a product. One also becomes aware of its capabilities. Windows Backup can do more than most people think. For that reason I’m quite happy (more than a lot of people) with the product, especially in Windows 2008 R2.

Just like for ntbackup.exe before, I scripted an entire backup solution around wbadmin.exe with logging, archiving, mail alerts etc. Once you have such an adaptable script you can nicely make due with Windows Backups in various environments. The next step is to write the script in PowerShell. That hasn’t been done yet because the script also needed to run on Windows Core which until R2 had no support for .NET and thus PowerShell.

Al lot has happened in the last quarter of 2009. On October 8th 2009 Sysinternals released disk2vhd tool. The current version now also has CLI support. See http://technet.microsoft.com/en-us/sysinternals/ee656415.aspx for more information. Recently some commercial vendors have also released free tools you can use for this. VizionCore made there vConverter available for free (http://www.vizioncore.com/free/vConverter/index.php). These tools greatly simplify the P2V or V2V scenarios. Still the “hands on approach” is a good way to learn about technology so I will publish my experiences in a series about windows backup, virtualization (P2V and V2V) and such.

As stated above I know people who dismiss Windows Backup as a valid solution. This is not always justified. But if you haven’t really figured out the tool, how would one know? Sure I use Backup Exec, CommVault and the like for larger environments. Sometimes I work in places with dozens to a hundred terabytes of data and multiple SAN’s. But that doesn’t mean one needs to dismiss all other approaches. Use what is needed where it is needed. I have saved several severs and data using the native backup tools in windows over my career. As recently as 10 days ago I did a bare metal recovery of a W2K8R2 that was messed up by user error. Just know what, where, how and when to use it. Isn’t that the same for any product or solution?

In this series we’ll describe a rather challenging disk configuration on the physical machine we need to virtualize and describe the desired end state of the virtual machine. We’ll discuss setting up the virtual machine to recover the backup. After that we’ll discuss the restore process. Finally we’ll turn our attention to sanitizing the disk layout & configuration. I hope you’ll find it both interesting and useful.