Failover Cluster Node Names in Upper & Lower Case In Window 2012 with Cluster.exe, PowerShell & GUI

Posted on April 26, 2012 by workinghardinit

Cluster Node Names Can Be Inconsistently Named

A lot of us who build failover clusters are bound to run into the fact that the node names as shown the Failover Cluster Management GUI is not always consistent in the names format it gives to the nodes. Sometimes they are lower case, sometimes they are upper case. See the example below of a Windows Server 2008 R2 SP1 cluster.

Many a system administrator has some slight neurotic tendencies. And he or she can’t stand this. I’ve seen people do crazy things like trying to fix this up to renaming a node in the registry. Do NOT do that. You’ll break that host. People check whether the computer object in AD is lower or upper case, whether the host name is lower or upper case, check how the node are registered in DNS etc. They try to keep ‘m all in sync at sometimes high cost Smile But in the end you can never be sure that all nodes will have the same case using the GUI.

So what can you do?

Use cluster.exe to add the node to the cluster. That enforces the case you type in the name! An example of this is when you’d like upper case node names:
```
cluster.exe /cluster:CLUSTER-NAME /add /node:UPPERCASENODE1
```
Some claim that when you add all nodes at the same time and they will all be the same. But ‘m not to sure this will always work.

Windows 2012

In Windows 2012 PowerShell replaces cluster.exe (it is still there, for backward compatibility but for how long?) and they don’t seem to enforce the case of the names of the node. For more info on Failover Clustering PowerShell look at Failover Clusters Cmdlets in Windows PowerShell, it’s a good starting point.

Don’t despair my fellow IT Pros. Learn to accept that fail over clustering is case insensitive and you’ll never run into any issue. Let it go …. Well unless you get a GUI bug like we had with Exchange 2010 SP1 or any other kind of bug that has issues with the case of the nodes Smile .

If you want to use cluster.exe (or MSClus) for that matter you’ll need to add it via the Add Roles and Features Wizard / Remote Administration Tools /Feature Administration Tools / Failover Clustering Tools. Note that there are not present by default.

On an upgraded node I needed to uninstall failover clustering and reinstall it to get it to works, so even in that scenario they are gone and I needed to add them again.

MSClus and Cluster.EXE support Windows Server 2012, Windows 2008 R2 and Windows 2008 clusters. The Windows Server 2012 PowerShell module for clustering supports Windows Server 2012 and Windows Server 2008 R2, not Windows Server 2008.

For more information see the relevant section at Remote Server Administration Tools (RSAT) for Windows Vista, Windows 7, Windows 8 Consumer Preview, Windows Server 2008, Windows Server 2008 R2, and Windows Server “8” Beta (dsforum2wiki). You’ll have to live with the fact that a lot of documentation still refers to Windows Server 8. As of his post, it’s only been a week that the final name of Windows Server 2012 was announced.

Upgrading Hyper-V Cluster Nodes to Windows Server 2012 (Beta) – Part 3

Posted on April 20, 2012 by workinghardinit

This is a multipart series based on some lab test & work I did.

Part 1 Upgrading Hyper-V Cluster Nodes to Windows Server 2012 (Beta) – Part 1
Part 2 Upgrading Hyper-V Cluster Nodes to Windows Server 2012 (Beta) – Part 2
Part 3 Upgrading Hyper-V Cluster Nodes to Windows Server 2012 (Beta) – Part 3

And we have arrived at part three of my adventures while “transitioning” my Hyper-V cluster nodes to Windows Server 2012. I prefer the term transition as is more correct. We can still not do a rolling upgrade a cluster cluster. We still need to create a new cluster and recuperate the evicted nodes.

I’ll repeat myself here (again) by stating I did not reinstall the evicted nodes but upgraded them. Why, because I can and I wanted to try it out and see what happens. For production purposes I do advise you to rebuild nodes from scratch using a well defined and automated plan if possible. I already mentioned this in Upgrading Hyper-V Cluster Nodes to Windows Server 2012 (Beta) – Part 1

Moving the Storage & Hyper-V Guests

So we stopped Part 2 at a newly created cluster without any storage. That’s what we’ll be taking care of in this part. Let’s recap what we already mentioned at the end of Part 2.

We have several options for storage here. We could assign new storage but we cannot do a Quick Storage Migration between cluster using SCVMM2008R2 but that doesn’t fly as SCVMM2008R2 can’t manage Windows 2012 clusters and I don’t know if it ever will. We can do a good old manual or scripted export to and import from the new storage of the VMs what takes a considerable amount of time. You also need to have the extra storage available.

We can also recuperate the old storage with the VMs still on there. This could get tricky as no two cluster should be able to see & use the storage at the same time. The benefit could be that we can just use the import type in Windows Server 2012 “Register the virtual machine in-place” (use the existing unique ID) and be done with it. We’ll try that one. We’ll still have some down time but it should be pretty fast. It’s only from Windows Server 2012 on that we’ll be able to do Shared Nothing Live Migrations between clusters Smile and live will be good. If you have a SAN you could also use clones to get this job done without less risk. You work on cloned data and keep the original around instead of using that for the process described below.

So how do we approach this?

Since Windows Server 2008 storage & clustering isn’t the pain it could be in earlier version. It’s the disk manager handling all that and it makes live a lot easier. All disks presented to a cluster node are off line to the operating system until you bring it online. Even if it contains data or is presented to another host, whether that is a member of another cluster or a stand alone host. Pretty cool. It also means you can have all your nodes on line during the process. The process of bringing the disk online and, if needed formatting it with NTFS and then adding it to the cluster as storage can be done on just one of the nodes.

As you recall I unplugged the evicted node from the iSCSI storage (you could also disable the ports) before I upgraded it. The entire iSCSI configuration got upgraded perfectly so all I needed to do was plug the iSCSI cables in and the storage appeared offline. My old cluster node was up and running still accessing it. Pretty slick! And great as a demo but you can play it safer. That was fun Smile but perhaps we won’t be that brave in a production environment.

Options

You could decide to bring all LUNS over at once or one at the time. The process is the same. If you do it one by one you’ll have to rely on the above behavior to protect the LUNs against corruption or you can un-present the LUNS remaining on the old cluster from the new cluster so you’ll never have an issue. We’ve done both and it works out rather fine in testing. Windows clustering is really doing it’s best to prevent you from shooting yourself in the foot Smile

Let’s say I go LUN by LUN. Now I can just remove the VMs from the old cluster using the Failover cluster GUI so they are no longer highly available on that node. When I have no more clustered VMs on a CSV LUN I can shut down all the guests in Hyper-V Manager and stop right there.

On the old cluster I remove that LUN from the CSV storage and from the cluster storage. At that moment that LUN is already taken offline for you!

Pardon the silly size but I didn’t have space left to make a realistic screenshot Smile

Great, Windows is protecting us against any possible data corruption! So now I can than un-present the LUN form the old cluster nodes. The next step is to enable the ISCI ports, present that LUN to the new cluster node or nodes (depends on where in the x number of node process you are) or just plug in the cable .

You’ll see the new LUN off line than on the new cluster. We can than make the LUN on line so it will be available to add to the cluster. Just right click that disk and select “Online”.

Right click on storage

Select an disk that’s available to add to the cluster.

Things has gotten a lot simpler with CSV in Windows Server 2012. No more enabling it with a funky warning message that’s well meant but is rather confusing an annoying. You just right click the disk and choose “Add to Cluster Shared Volumes” and that’s it.

And there it is. That disk in our new cluster is ready to use as a CSV.

So we can now us a nifty new capability in Windows Server 2012 Hyper-V: “Register the virtual machine in-place” (use the existing unique ID)

The wizard starts.

Select the folder where your VM or VMs live. yes you can do multiple given that your folder structure allows for this.

It’s found one VM in our folder

We click Next

We select “Register the virtual machine in-place” (use the existing unique ID) and click next.

If something is not right like some forgotten “saved” states you’ll get a change to dump those or cancel the process to deal with it properly before trying it again.

If virtual network names do not match you’ll get the opportunity to set correct that by specifying what virtual switch to use.

If all was well in the first place or after you’ve fixed any issues like the ones demonstrated above you’re good to go. Click finish and enjoy your Windows Server 2012 Hyper-V Guest.

At this point you can already start your VMs. I know that the next step is to make all these VMs highly available but here we have some good news as well. You can now make running VMs highly available. Yeah! They no longer need to be shut down. All this is done via the well know process so I’m not going to walk trough the entire process here. But the screen shot of a making a running VM highly available is worth posting Smile

Upgrading Hyper-V Cluster Nodes to Windows 8 (Beta) – Part 2

Posted on April 13, 2012 by workinghardinit

This is a multipart series based on some lab test & work I did.

Part 1 Upgrading Hyper-V Cluster Nodes to Windows Server 8 (Beta) – Part 1
Part 2 Upgrading Hyper-V Cluster Nodes to Windows 8 (Beta) – Part 2
Part 3 Upgrading Hyper-V Cluster Nodes to Windows 8 (Beta) – Part 3

Here’s part two of my adventures while upgrading or rather “transitioning” my Hyper-V cluster nodes to Windows 8. Transition is more correctly as you can not upgrade a cluster, you create a new cluster en recuperate the node. I did however not reinstall them but upgrade them. Why, because I can and I wanted to try it out to see what happens. For production purposes I do advise you to rebuild nodes from scratch using a well defined and automated plan if possible. I already mentioned this in Upgrading Hyper-V Cluster Nodes to Windows Server 8 (Beta) – Part 1

So we stopped Part 1 with a evicted and upgraded node. We’ll want to create a new cluster with that node and then transition the other nodes over to the new Windows 8 cluster one by one, or in batches, depending on how many you can afford to take down at one time. In this part we’ll just build our new Window 8 cluster with a single node. It’s a good thing this is possible as we can start a transition with just one node. This an easy part.

First of all we create a new cluster. I will all look very familiar if you’ve ever created a Windows 2008 (R2) cluster.

The Create Cluster Wizard appears, read all the advice you want and click “Next”

We select the node that we evicted from the old cluster and upgraded to Windows 8

You now run the validation test for your cluster

Let’s run ‘m all and see what it has to say.

We get a summary of what notes will be tested and what tests will be run. Click “Next”

The tests are running.

We get a pass with some warnings. So we click “View Report” to take a look. It’s OK we only have one node, we don’t have storage yet and networking wise we still need to configure some things but we can create a one node cluster, So click “Finish”

I named my new cluster “warriors”, the old one was called “warrior”.

I define the IP Address for the Access Point for administering the cluster

We’re ready to create the cluster so we click “Next” and the creation process starts

And we’re informed we’ve have successfully created a cluster. Click Finish. Any experienced cluster builder should find this process very familiar without surprises.

So now we have a cluster existing out of one node and we haven’t got any storage assigned yet.

We have several options for storage here. We could assign new storage but we cannot do a Quick Storage Migration between cluster using SCVMM2008R2 but that doesn’t fly as SCVMM2008R2 can’t manage Windows 8 clusters and I don’t know if it ever will. We can do a good old manual or scripted export and import of the VMs what takes a considerable amount of time.

We can recuperate the old storage with the VMs still on there. This could get tricky as no two cluster should be able to see & use the storage at the same time. The benefit could be that we can just use the import type in Windows 8 ("Register the virtual machine in-place" (use the existing unique ID) and be done with it. We’ll try that one. We’ll still have some down time but it should be pretty fast. It’s only from Windows 8 on that we’ll be able to do Shared Nothing Live Migrations between clusters Smile We’ll address that in Part 3.

Integration Services Version Check Via Hyper-V Integration/Admin Event Log

Posted on March 1, 2012 by workinghardinit

I’ve written before (see "Key Value Pair Exchange WMI Component Property GuestIntrinsicExchangeItems & Assumptions") on the need to & ways with PowerShell to determine the version of the integration services or integration components running in your guests. These need to be in sync with the one running on the hosts. Meaning that all the hosts in a cluster should be running the same version as well as the guests.

During an upgrade with a service pack this get the necessary attention and scripts (PowerShell) are written to check versions and create reports and normally you end up with a pretty consistent cluster. Over time virtual machines are imported, inherited from another cluster of created on a test/developer host and shipped to production. I know, I know, this isn’t something that should happen, but I don’t always have the luxury of working in a perfect world.

Enough said. This means you might end up with guests that are not running the most recent version of the integration tools. Apart from checking manually in the guest (which is tedious, see my blog "Upgrading a Hyper-V R2 Cluster to Windows 2008 R2 SP1" on how to do this) or running previously mentioned script you can also check the Hyper-V event log.

Another way to spot virtual machines that might not have the most recent version of the integration tools is via the Hyper-V logs. In Server Manager you drill down in the “Diagnostics” to, “Event Viewer” and than navigate your way through "Applications and Services Logs", "Microsoft", "Windows" until you hit “Hyper-V-Integration”

Take a closer look and you’ll see the warning about 2 guests having an older version of the integration tools installed.

As you can see it records a warning for every virtual machine whose integration services are older than the host running Hyper-V. This makes it easy to grab a list of guest needing some attention. The down side is that you need to check all hosts, not to bad for a small cluster but not very efficient on the larger ones.

So just remember this as another way to spot virtual machines that might not have the most recent version of the integration tools. It’s not a replacement for some cool PowerShell scripting or the BPA tools, but it is a handy quick way to check the version for all the guests on a host when you’re in a hurry.

It might be nice if integration services version management becomes easier in the future. Meaning a built-in way to report on the versions in the guests and an easier way to deploy these automatically if there not part of a service pack (this is the case when the guest OS and the host OS differ or when you can’t install the SP in the guest for some application compatibility reason). You can do this in bulk using SCVMM and of cause Scripting this with PowerShell comes to the rescue here again, especially when dealing with hundreds of virtual machines in multiple large clusters. Orchestration via System Center Orchestrator can also be used. Integration with WSUS would be another nice option, for those that don’t have Configuration Manager or Orchestrator but that’s not supported as far as I know for now.

Working Hard In IT

My view on IT from the trenches

Category Archives: Windows Server 2008 R2 SP1