Category Archives: Hyper-V

The Hyper-V Processor Virtual Machine Reserve

Posted on by
3

Introduction

Hyper-V offers 3 ways of managing or tweaking the CPU scheduler to provide the best possible configuration for certain scenarios and use cases. The defaults normally work fine but of certain conditions you might want to tweak them for the best possible outcome.  The CPU resource controls at your disposal are:

  • Virtual machine reserve  – Think of this as the minimum CPU “QoS”
  • Virtual machine limit – Think of this as the maximum CPU “QoS”
  • Relative Weight – Think of this as the scale defining what VM is more important.

Note that you should understand what these setting are and can do. Threat them like spices. Select the ones you need and don’t overdo it. They’re there to help you, if needed you can leverage all three. But it’s highly unlikely you’ll need to do so. Using one or two will server you best if and when you need them.

In this blog post we’ll look at the virtual machine reserve.

Virtual Machine Reserve

The virtual machine reserve is a minimum CPU guarantee. This is configured at the virtual machine level for all vCPUs of that virtual machine. This means a couple of things. The reserve is guaranteed for the virtual machine that has it configured. This means that when there is contention for CPU resources the reserve is enforced. When there is no reserve configured are left to compete for the available resources, they don’t have any “SLA” minimum guaranteed CPU cycles however

image

The virtual machine reserve is configured as the minimal % of CPU usage we’ll guarantee a virtual machine to get when there is contention. 0% reserve means that the virtual machine reserve is disabled. This is the default.

So how is this reserve accomplished? When a virtual machine is started there is a check if the virtual machine reserve can be met. If not, the virtual machine will not be started. This is also the case when you want to quick or live migrate a virtual machine. You cannot migrate a virtual machines to a host that cannot deliver the reserve.

The reserve is guaranteed. When you have started enough virtual machines with a reserve to consume 100% of the host CPU resources you cannot start another virtual machines that has a reserve configured. This is even the case if all the running virtual machines who together have reserved 100% of the host CPU resources are completely idle. That’s the cost of reserving CPU resources.

Also note you can mix virtual machines with and without a reserve configured. That’s perfectly fine.

Below is an extreme example. This single virtual machines has 56 vCPU configured with a 100% reserve. This means that this virtual machines will only start on a host that has no other virtual machines with a reserve running. Virtual machines without a reserve will run but when this virtual machines requires the minimum to be met they’ll lose their CPU cycles.

image

So how does this work

When the virtual machines are running and contention for CPU resources materializes on the host than the reserve will kick in and guarantee the virtual machines get there guaranteed minimum. If there is no contention this isn’t enforced and all virtual machines can grab CPU resources as long as they are available. Only when a reserve can’t be met due to lack of resources the CPU scheduler intervenes. This means there is no waste by not allowing other virtual machines to use what is not needed at any given moment by others. Yes virtual machines can use more than their reserve if it’s available and other virtual machines don’t have a need for their reserved CPU cycles. But the moment there is contention, the reserve is guaranteed. That’s why you cannot reserve more that 100% in total. This however makes things a bit more complex in real life. A reserve is not enforced when not needed but it does have to be there. This means that if you reserve a 30% for a virtual machine with 56vCPU you can’t even reserve 80% for a virtual machine with 8 vCPU and run those together.

image

Even when you have 56 cores left with 70% CPU unreserved you cannot find one single CPU with 80% free, let alone 8 of them. This means you cannot start such a virtual machine when the first one is running and vice versa. So that’s another caveat you need to consider.

Use Cases

The primary use case of virtual machine reserve is to enforce an SLA for a virtual machines compute needs. When a DBA demands 100% of the 8 vCPUs his SQL Server virtual machine has configured you can set the reserve to 100%, which is 14*% of all CPU resources on the host. On our 56 core host that means at least 8 CPU have to have 100% of resources free or that SQL Server virtual machine won’t even start as the reserve can’t be guaranteed. imageWhen it’s running and there is no contention for resources other virtual machines can grab whatever they need. The CPU scheduler will only take resources away from the other virtual machines if it’s needed to guarantee the reserve configured for the SQL Server virtual machine.

Some people get creative and use the virtual machine reserve to allocate 100% of all host CPU resources to all virtual machines running on a host. This means all resources are taken and they’ll need to rebalance the reservation if you want to add more virtual machines with a certain reserve. This only works if you can enforce all the virtual machines are created with a reserve. If not some of the new virtual machines might not get any CPU cycles when here is a lot of contention.

Limitations

It can become high maintenance. When people set up CPU reserves for all virtual machines (let’s say 14 of them each with 2 vPCU)  on a host with 2*14 cores. That means we can give each virtual machine a reserve of 10%. They all get 2*10% of 28 cores. 

When you now add a virtual machine with a reserve to the host you’ll need to reset the reserves to accommodate 11 virtual machines. As said this can be used to make sure no VM get’s deployed and started without you noticing (some one will complain when a VM doesn’t start) but this is tedious to manage.

Also note that this game of percentages plays per host but those can be part of a cluster. So when you do this on all nodes on a cluster things will go wrong if you have reserved 100% of the CPU resources on all nodes, live migration and failover will run into issues as extra virtual machines can’t start on nodes that haven’t got sufficient CPU resources left. You need to account and plan for for this

Conclusion

Virtual machine reserve is a powerful tool to have when needed. You do need to understand its behavior very well and take that into behavior for startup, quick and live migrations.

If you do that and use it wisely it can help you achieve SLA’s and the best possible guaranteed performance when needed.

Live Export a Running Virtual Machine or a Checkpoint

Posted on by
4

A remarkably little known feature in Windows Sever 2012 R2 (and Windows 8.1)  is the ability to export one or multiple running virtual machines.

image

You just select right click in the Hyper-V manager and select Export from the context menu and follow the wizard to select an export location. Easy. This is also possible via PowerShell so you can automate this. The result is a VM you can import which gives you a copy of the original virtual machine in a saved state, at the point in time that you exported it.

More people seem to know about the capability to export a checkpoint of a running virtual machine, not so many of the capability to export a running VM itself. I noticed this because some people figured the latter was a new feature in Windows 2016. No it’s not. We’ve had this option since Windows 8.1 and Windows Server 2012 R2.

image

So why even have the option of exporting a checkpoint of a running VM? Because this enables you to have exports from various points in time, which is pretty cool and handy during test and development and trouble shooting or lab work. As a standard checkpoint has state in Windows Server 2012 R2 I prefer to shut down the VM, create a checkpoint and start the VM again. When I then export that checkpoint I don’t have to worry about the state in the VM at that point in time as it was shut down.

For some workloads this isn’t a big deal bit for some this is not a great experience, hence the fact that checkpoints are “”not supported in production but for test and dev.

In Windows Server 2016 we now have production checkpoints. That means that when we apply such checkpoints we have a consistent state just like when we restore VM from a backup. You’ll have to boot it up after applying the checkpoint, they do not appear running with the state at the time the snapshot was taken. Well, not unless you opt to create standard checkpoints. The reduces the need for me to shut down a VM before I create a checkpoint to export in many cases.

When you export a running VM in Windows Server 2016 you’ll have a copy of it in saved state. Just like you did in Windows Server 2012 R2, no change there. When you import that you’ll have a VM in saved state that you need to start up. If you want an application consistent copy, create a production checkpoint first and export that one.

So there you go. The feature to live export a running virtual machine was here before and it’s still here. The real extra capability with live exports comes from leveraging the live export of a checkpoint of a running virtual machine and the fact that we now have production checkpoints.

E2EVC 2016 Dublin

Posted on by
Reply

So after 4 days in London with the Veeam Vanguards I’m hopping over the Irish sea tonight towards Dublin to attend and present at the Experts 2 Experts Virtualization Conference (E2EVC) 2016  Dublin.

image

I’ll be presenting on High Availability with Windows Server 2016 Failover Clustering and Hyper-V. These are supported and enhanced by other new or improved capabilities in Windows Server 2016. So there will be a lot to take in. I’ll be around to talk shop before and after the session so if you want to chat, find me around the conference.

E2EVC a boutique community driven conference. It’s small scale and independence makes it a very direct experience in both realism and hard core real world experience in the virtualization ecosystem and related technologies. We encourage anyone to attend and present. No “prima donnas”  – you can speak when you want to as long as you’re willing to do so and share knowledge and insights.  Give it a shot!  I hope to see you there

SOFS / SMB 3 Offers Best VM Resiliency Experience

Posted on by
2

I have blogged about Virtual Machine Resiliency in Windows 2016 Failover Clustering before in Testing Virtual Machine Compute Resiliency in Windows Server 2016 

Those test and demos were done with block lever storage, CSV on Fibre Channel, iSCSI or shared SAS. Today we’ll look at the experience when you’re running your VMs on a continually available file share on a Scale Out File Server (SOFS). This configuration offers the best possible experience.

Why well, when the cluster node is in Isolated mode this has no impact on the SOFS share as this is a resource external to the Hyper-V cluster. In other words it remains on line. This means that the VMs, even if they have lost their high availability during the time the node is Isolated, they keep running. After all there is nothing wrong with Hyper-V itself. With block level CSV storage you lose access to the storage as that a cluster resource and the node got isolated. That’s why the VMs go into a paused critical state during a transient failure with block level storage but they don’t when you’re using SOFS.

image

The virtual machine compute resiliency feature in action shows you that the VMs service a transient failure without issues. Your services need never know something was up. Even when the transient failure is reoccurring that doesn’t mean it will cause down time. The node will be quarantined and if it come backup the workload will be live migrated away.

image

You can watch a video of this in action here on Vimeo:

The quarantine threshold and duration as well as the resiliency period and can be tweaked to your environment to get the best possible results.

image

SMB 3 for the win! This is yet one more convincing argument to start looking into SOFS and leveraging the capabilities of SMB3. Remember that you can run as SOFS cluster against your existing shared storage to get started if you can get the IOPS/latency you require. But also look into storage spaces, especially storage spaces direct which avoids some of the drawback SANs have in such a scenario. High time for storage vendors to really scale out, implement SMB 3 well and complete and keep the great added value features they already have in their offering. It’s this or becoming yet a bit more irrelevant in todays storage scene in the Microsoft ecosystem.