Cluster Validation Bug In Windows 2008 R2 SP1 – Disk has a Persistent Reservation on it

Posted on by
2

Pretty soon after the RTM of Windows 2008 R2 SP1 release we were discussing a bug on the TechNet forum (Hyper-V Cluster issues after applying Win2008 R2 SP1 on a 3 node Cluster!) here. If you have a Windows 2008 R2 SP1 cluster with more than 2 nodes you get the following warning:

List Potential Cluster Disks

Disk with identifier 2sef8cdf has a Persistent Reservation on it. The disk might be part of some other cluster. Removing the disk from validation set

“Normally” you would expect such a warning if the LUN ever belonged to another cluster and it needs the old reservation cleared. To do that you would use following command on the node that throws the warning (where in this example the disk is disk 2 in disk manager/diskpart) and after making sure it is not in use anywhere else in the SAN

"cluster node clusternode1 /clearpr:2"

However this is not the cause here as were most others in this discussion. And I’m pretty no san software or MPIO software is putting a reservation on there either so what is this? A bug? Well yes, it has been confirmed by Microsoft support that is is indeed a bug an that is fix will be made available by April 18th2011 .

This was not a show stopper bug, but it could be one if you needed to add a host to a cluster and confirm all is well and supported. However if you’re certain you’ve done everything right you can choose not to run cluster validation.

I will update this blog with more information when the fix becomes available.

UPDATE:  The hotfix has become available today, April 26th 2011 as announced on the TechNet forum here:

A hotfix is now available that addresses the Win2008 R2 service pack 1 issue with Validate on a 3+ node cluster.  This is KB 2531907.  The KB article and download link will be published shortly, in the mean time you can obtain this hotfix immediately free of charge by calling Microsoft support and referencing KB 2531907. Update 27/05/2011 Here is the link: http://support.microsoft.com/kb/2531907/en-us?sd=rss&spid=14134

Microsoft re-releases Exchange 2010 Service Pack 1 Update Rollup 3 (V3)

Posted on by
Reply

Due to an issue with Blackberry devices Exchange Server 2010 SP1 Update Rollup 3 was withdrawn on March 14th. See my blog on this here.

The issue was identified and fixed so now there is a new release. My environment doe not use Blackberries so we were not impacted, We had already deployed RU3 so all we have to do is apply the current release over that one and we’re good to go.

It’s a good thing it’s back available since if bring back UDP support which is a much asked and need feature for Outlook 2003 and it also fixed the DAG copy GUI bug introduced  with SP1  (September 2010) where you could see and thus mange the copies anymore with EMC.

So all in all good news and we can all move ahead now.

Microsoft iSCSI Software Target 3.3 for Windows Server 2008 R2 available for public download

Posted on by
1

As TechNet subscribers, we had access to Windows Storage Server 2008 with Microsoft iSCSI Software Target 3.2  (also see Jose Barreto’s blog on this here). That was sweet but for one little issue. This SKU cannot be a Hyper-V Host. In order not to lose a physical host in the lab you could edit the MSI installer from the Windows Storage Server 2008 install media where you would delete the SKU check. Problem solved but not very legal so nobody ever did that.  You can install Windows Storage Server in a VM for the lab I know but that becoming very SkyNet like … Virtual servers providing virtual storage for virtual servers … and while a good option to have I like to have a hardware host.

Bring Windows Storage Server 2008 R2 along and Microsoft decided that we could have the iSCSI Software Target 3.3 software without constraints, except that you needed a TechNet/MSDN subscription, to install on W2K8R2. This is the one I’m running in my labs at the moment installed on a Physical Windows Server 2008 R2 Enterprise edition that also is a Hyper-V host. This provides all my iSCSI storage to both physical and virtual clusters. I used it to test MelioFS with FileScaler recently with a 2 node virtual cluster.

Today, Jose Barreto blogged about the public release of iSCSI Software Target 3.3 for Windows Server 2008 R2. This is very good news as now everyone has access to an iSCSI target for labs, testing, POCs, and even production. Thank you, Microsoft. Now with some luck, we could get some SMI-S support for it with SCVMM2012? Please?

If you need some help, Jose Barreto has a bunch of blog posts on configuring the iSCSI target, so I suggest you check out his site. As an added benefit, Microsoft iSCSI Software Target 3.3 setup & configuration is scriptable using PowerShell.

KB2230887 Hotfix for Dynamic Memory with Windows 2008 Standard & Web edition does not apply to without Hyper-V editions?

Posted on by
Reply

As my readers all know by now, since I blogged about this here, you need to install an update/hotfix for Hyper-v Dynamic Memory to work with Windows 2008 Standard & Web edition. You can find more information here:  Hyper-V Dynamic Memory does not work on a Windows Server 2008 Standard Edition or Windows Web Server 2008 virtual machine (VM)

UPDATE 2011/06/23: Microsoft released the hotfix based on end-user feedback and you can download version 2 that works on all SKUs now http://support.microsoft.com/kb/2230887 (v2).

The cause is that on these versions of the operating systems the the required memory enlightenment is supported. After installing the hotfix (or SP1 in the case of Windows 2008 R2) memory addition enlightenment is available on these SKU and your good to go.

But recently I ran into an issue. One virtual machine guest on a Windows 2008 R2 SP1 cluster that is running the Windows 2008 Standard edition without Hyper-V SKU, x86 the standalone installer for Windows6.0-KB2230887-x86 throws following warning:

Windows Update Standalone Installer

The update does not apply to your system

OK

That’s a bit strange. As you can see the hotfix has not been installed. And why would I need the with Hyper-V SKU to use dynamic memory with this guest?

I installed the same hotfix without any issue on several Windows 2008 Standard Edition (the SKU with Hyper-V)  guests. So what is going on here? What exactly is different about the without Hyper-V SKU?  Note that Windows 2008 R2 no longer has such a SKU.  Microsoft states that it is an SKU for people who don’t need virtualization. Well as they installed it as a guest virtual machine they chose this version and now what? No hotfix for dynamic memory as a guest?

There is a TechNet forum discussion going on here where they have this issue and I asked them to check what SKU it was happening on. Bingo! It’s on the Windows 2008 Standard without Hyper-V version!

I don’t expect any Hyper-V functionality or management tools but I do expect to get the hotfix to enable Dynamic Memory in guests with this SKU, just like we get any other update that is relevant to Hyper-V, for example, upgraded Integration Services. I’m going to ping a Microsoft contact on this one and see if they can help with this. And in case you’re wondering SKU = Stock Keeping Unit.